Vauxhall Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Simtec 71 >
< Replace DIS ignition module (Z 10 XE, Z 10 XEP, without air conditioning, LHD)
Corsa C
J Engine and Engine Aggregates
Fuel Injection Systems
Motronic M/ME 1.5.5
Ignition Module / Repair Instructions
Replace DIS ignition module (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)
Replace DIS ignition module (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)
Remove
1.
Open bonnet
2.
Remove ignition module
•
Remove ignition module cover
–
Move to the right
•
Disconnect wiring harness connector.
•
Unscrew 2 bolts
•
Extract using
KM-6009
(1)
Note:
Do not tilt
Remove
3.
Install ignition module
•
Tighten 2 bolts
8 Nm
•
Connect wiring harness plug
•
Attach ignition module cover
4.
Close bonnet
J Engine and Engine Aggregates
Fuel Injection Systems
Motronic M/ME 1.5.5
Ignition Module / Repair Instructions
Replace DIS ignition module (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)
Simtec 71 >
< Replace DIS ignition module (Z 10 XE, Z 10 XEP, without air conditioning, LHD)