vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Replace catalytic converter control oxygen sensor (Z 10 XE, Z 10 XEP, without air conditioning system, LHD) > < Check fuel pressure (Z 10 XE, Z 10 XEP, with air conditioning system, LHD)

Corsa C

Replace mixture regulation oxygen sensor, heated (Z 10 XE, Z 10 XEP, without air conditioning system, LHD)

  Remove

1.   Open bonnet
2.   Remove heated oxygen sensor for mixture regulation
•   Disconnect wiring harness plug (2)
– Unclip cable
•   Unscrew carefully using KM-6129 (1)
Object Number: 2410623 Size: DEFAULT


  Install

3.   Install oxygen sensor, mixture regulation, heated
•   Apply assembly paste (white) to thread
•   Tighten oxygen sensor 40 Nm
•   Connect wiring harness plug
– Clip in cable
4.   Close bonnet

Replace catalytic converter control oxygen sensor (Z 10 XE, Z 10 XEP, without air conditioning system, LHD) > < Check fuel pressure (Z 10 XE, Z 10 XEP, with air conditioning system, LHD)