vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Replace pedal travel sensor (Z 10 XE, Z 10 XEP, with air conditioning, LHD) > < Replace mixture regulation oxygen sensor, heated (Z 10 XE, Z 10 XEP, without air conditioning system, LHD)

Corsa C

Replace catalytic converter control oxygen sensor (Z 10 XE, Z 10 XEP, without air conditioning system, LHD)

  Remove

1.   Raise lifting platform
2.   Remove catalytic converter control oxygen sensor
•   Disconnect wiring harness plug (1)
•   Carefully unscrew using KM-6129 (2)
Object Number: 2410622 Size: DEFAULT


  Install

3.   Install catalytic converter control oxygen sensor
•   Apply assembly paste (white) to thread
•   Tighten oxygen sensor 40 Nm
•   Connect wiring harness plug
4.   Lower lifting platform

Replace pedal travel sensor (Z 10 XE, Z 10 XEP, with air conditioning, LHD) > < Replace mixture regulation oxygen sensor, heated (Z 10 XE, Z 10 XEP, without air conditioning system, LHD)