vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Torque Converter > < Survey - Assemblies (AF13-II)

Corsa C

Replace axle shaft seal ring (AF13-II)

  Remove

1.   Remove axle shaft concerned
2.   Remove affected axle shaft seal ring with KM-557-1 (2) and KM-557-2 (1)
Note:   Do not damage sealing surfaces.
Object Number: 8063903 Size: DEFAULT


  Install

3.   Drive in seal ring flush with plastic hammer (2) and KM-446 (1).
•   Coat new seal ring with transmission fluid
4.   Install axle shaft
5.   Check transmission fluid level and correct if necessary LUREF_1.gif
Object Number: 8063904 Size: DEFAULT


Torque Converter > < Survey - Assemblies (AF13-II)