|
Remove and install converter (AF13-II)
 Remove
| 2. |
Pull converter with KM-899 (M10) out
of transmission (arrows)
Note: Fluid escapes
– place pan underneath.
|
| 3. |
Remove seal ring from transmission with KM-J-7004 (1) and KM-586
(2).
|
|
|
Install
| 4. |
Drive in new seal ring flush with KM-674 (3)
|
| 5. |
Insert converter into transmission with KM-899
Note: Ensure that
converter is properly seated. Converter must engage in guide.
|
| 6. |
Measure distance between connecting threads of converter and
the mating surface of the transmission housing with calliper gauge
(1)
| • |
AF13-II spacing distance: approx. 12
mm
|
|
|
|
|
