Replace wiring harness for selector lever assembly
(AF13-II)
Remove
1. |
Survey - Wiring harness plug X51 pin assignments
|
|
|
3. |
Remove selector lever assembly
|
4. |
Unclip automatic transmission console insert (arrows) and pull
upwards
|
5. |
Remove bulbs with socket out of automatic transmission console
insert
|
6. |
Pull bulbs out of socket
|
|
|
7. |
Clip selector lever actuation wiring harness from wiring
harness bracket (3)
|
8. |
Disconnect ground cable (arrow) from ground connection
|
9. |
Push cable with spring contact for economy/sport shifting tip
switch (pin 2 in plug X51) and winter program tip switch (pins 3, 4
and 5 in plug X51) out of wiring harness with MKM-923-22
Note: Note
configuration of cables
|
10. |
Disconnect selector lever lock solenoid switch (5) wiring plug
(4)
|
11. |
Unclip wiring harness plug (1) out of selector lever assembly
and remove selector lever actuation wiring harness
|
|
|
Install
12. |
Connect wiring plug (1) of selector lever solenoid switch
(2)
|
13. |
Push cable with spring contact for economy/sport shifting tip
switch (PIN 2 in plug X51) and winter program tip switch (PINS 3, 4
and 5 in plug X51) into wiring harness plug (3)
Note: Note
configuration of cables
|
14. |
Clip wiring harness plug into selector lever assembly
|
15. |
Connect ground cable to ground connection
|
16. |
Clip bulbs and holders into automatic transmission console
insert
• |
Insert bulbs into socket.
|
|
17. |
Clip automatic transmission console insert onto console.
|
18. |
Clip shift lever actuation wiring harness into wiring harness
bracket (5)
• |
Secure shift lever actuation wiring harness with cable ties
(4)
|
|
19. |
Install selector lever assembly
|
20. |
Install centre console
|
|
|
21. |
Check selector lever safety functions
|
|