Transmission Housing, Replace (F17)
Remove
|
2. |
Attach KM-444-C (1) to
transmission
|
3. |
Attach transmission to KM-113-2 (2)
with KM-444-C
|
4. |
Remove gearshift cover (5) with shift guide (6)
|
5. |
Remove reversing lamp switch (4)
|
6. |
Remove end shield cover (3)
|
|
|
9. |
Remove bearings for main shaft (2) and drive shaft (1) in
transmission housing
|
10. |
Remove central release (5)
|
11. |
Remove transmission housing pressure line (4) for central
release and pressure line sleeve (3)
|
12. |
Remove transmission housing from KM-444-C
|
|
Install
13. |
Attach new transmission housing to KM-444-C
|
|
14. |
Install bearings for main shaft (2) and drive shaft (1) in
transmission housing
|
15. |
Install transmission housing pressure line (4) for central
release and pressure line sleeve (3)
|
16. |
Install central release (5)
|
|
|
18. |
Install end shield (1)
|
19. |
Install end shield cover (2)
|
20. |
Install reversing lamp switch (4) with new seal ring
|
21. |
Install gearbox cover (3)
|
22. |
Remove transmission with KM-444-C
from KM-113-2
|
23. |
Remove KM-444-C from transmission
|
25. |
Correct transmission fluid level
|
|
|