Replace intermediate shaft bearing in clutch
housing (F23)
Remove
1. |
Dismantle transmission
|
|
2. |
Remove intermediate shaft bearing from clutch housing (4)
• |
Knock intermediate shaft out with KM-248 (3)
|
|
|
Install
3. |
Clean bearing seating and groove for retainer in clutch
housing
|
|
4. |
Insert new intermediate shaft bearing in clutch housing (5) and
secure
• |
Drive intermediate shaft in with KM-6119 (4) and KM-523-1
(3)
|
• |
Insert new retainer (2)
– |
Ensure that the retainer is correctly seated in the clutch
housing
|
|
|
|
|