Mounting for lifting equipment if using centring
device KM-6168
Models F 08, F 08 & W5L, F 68, F 25, F 06
|
Illustration K 5778 shows jacking points for the lifting
platform when using Centring Device KM-6168 . The position and the size of the jacking
plate of the lifting platform at the front must be selected so that
the centring bore is freely accessible and the anti-corrosion
protection on the welding flange of the sill is not damaged
(arrow).
The corresponding manufacturer's guidelines must be observed
when using lifting equipment.
|
|