Tank Vent Valve, Remove And Install (From Model
Year '04)
Remove
|
2. |
Release coolant return hose of throttle valve module (2)
• |
Release clamp (1)
– |
from throttle valve module
|
|
• |
Unclip coolant return hose (arrow) and lay aside
|
|
3. |
Release engine vent hose at intake manifold (5)
• |
Unclip hose and lay aside
|
|
4. |
Detach bracket of heater core coolant supply hose (3)
• |
Unclip coolant supply hose (4) and lay aside
|
|
|
5. |
Remove tank vent valve (2)
• |
Detach purging air hose (3) and lay aside
|
• |
Disconnect wiring harness plug (1)
|
• |
Unscrew 2x bolt (arrows)
|
|
|
|
Install
6. |
Install tank vent valve (2)
• |
Tighten 2 bolts (arrows)
|
• |
Connect purging air hose (3)
|
• |
Attach wiring harness plug (1)
|
|
|
|
|
7. |
Attach bracket of heater core coolant supply hose (3)
• |
Clip in bracket of coolant supply hose (3, 4)
|
|
8. |
Fasten engine vent hose at intake manifold (5)
|
9. |
Fasten coolant return hose of throttle valve module (2)
• |
Clip in coolant return hose (2) (arrow)
|
|
|
11. |
Program volatile memories
|
12. |
Check and correct coolant level
|
|