Flushing Air Hose, Remove And Install (From Model
Year 04)
Remove
2. |
Detach wheel housing inner panelling, right side, on F08, F08 &
W5L, F68 for F25, F06
Note: For Tigra-B
(model R97) detach protective panelling, front inner wing
|
|
3. |
Detach activated carbon canister (2)
|
4. |
Detach purging air hose (1) at activated carbon canister
|
|
5. |
Remove purging air hose (3)
• |
Unclip engine vent hose (4), heater core coolant supply hose
(1)
|
• |
Disconnect at tank vent valve (2) and unclip
|
|
|
|
Install
6. |
Attach purging air hose (3)
• |
Push on at tank vent valve (2) and clip in
|
• |
Clip in engine vent hose (4), heater core coolant supply hose
(1)
|
|
|
|
|
7. |
Attach purging air hose (1) to activated carbon canister
(2)
|
8. |
Attach activated carbon canister
|
|
9. |
Attach wheel housing inner panelling, right side, on F08, F08 &
W5L, F68 for F25, F06
Note: For Tigra-B
(model R97): attach protective panelling, front inner wing
|
11. |
Program volatile memories
|
|