|
Fuel Filler Pipe, Remove and Install - Model F 06,
F 25 (Diesel)
 Remove
| 1. |
Empty fuel tank with fuel transfer unit
Note: Fuel escapes
– observe safety measures and national legislation.
| • |
Store drained fuel in suitable locking container.
Note: see catalogue
"Opel/Vauxhall Workshop Equipment"
|
|
| 2. |
Remove fuel filler pipe rubber seal.
|
| 3. |
Remove upper fuel filler tube (1) fastening bolt.
|
| 4. |
Remove right hand wheel arch protective housing 
|
|
|
| 5. |
Remove upper bleeder hose (1).
|
|
|
| 6. |
Detach vent hose (1) and disconnect cable ties (4).
|
| 7. |
Lay aside guard tube (6) with bleeder hoses.
|
| 8. |
Detach fuel filler hose (5) from fuel filler pipe (2).
|
| 9. |
Remove fuel filler pipe fastening bolt (3) and remove fuel
filler pipe.
|
|
|
Install
| 10. |
Insert fuel filler pipe and attach to rear frame
Note: Tightening torque
13 Nm
|
| 11. |
Attach fuel filler hose to fuel filler pipe.
|
| 12. |
Attach guard tube with bleeder hoses to fuel filler pipe.
|
| 13. |
Attach lower bleeder hose
|
| 14. |
Attach upper bleeder hose
|
| 15. |
Attach upper fastening bolt, fuel filler pipe
Note: Tightening torque
3 Nm
|
| 16. |
Attach right-hand wheel arch protective housing
|
| 17. |
Install fuel filler pipe rubber seal.
|
| 18. |
Fill fuel tank with fuel transfer unit
Note: see catalogue
"Opel/Vauxhall Workshop Equipment"
|
|
