|
Lock Cylinder for Steering and Ignition Lock,
Remove and Install
 Remove
| 1. |
Unclip rosette, steering and ignition lock
|
| 2. |
Remove steering column panelling 
Note: For Tigra-B
(model R97) .
|
| 3. |
Detach windscreen wiper switch (1) from bracket .
Note: For Tigra-B
(model R97) .
|
| 4. |
Move ignition key in lock cylinder to "I" position
Note: Unlock locked
steering lock by turning steering wheel gently!
|
| 5. |
Press down pawl with thin drift (arrow) and remove lock
cylinder.
|
|
|
Install
| 6. |
Press steering locking pin (arrow) downwards until it
engages.
|
Important: Before sliding in the
lock cylinder, ensure that the lock cylinder and the contact part
are in the same switch position!
|
| 7. |
Slide lock cylinder with key in position "I" into lock cylinder
housing until pawl engages audibly.
|
|
|
| 8. |
Attach windscreen wiper switch to bracket
Note: For Tigra-B
(model R97) .
|
| 9. |
Pull out ignition key.
|
| 10. |
Attach steering column panelling
Note: For Tigra-B
(model R97)
|
| 11. |
Clip rosette for steering and ignition lock into the correct
position
|
| 12. |
Check function of steering and ignition lock.
|
|
