Bulbs – Headlamp/Signal Lamp, Replace
Remove
1. |
Unlock corresponding lamp holder by turning it and
disconnect
• |
Detach cover of dipped and main beam
|
• |
Release wiring harness plug and disconnect
|
|
2. |
Remove bulb
Note: Illustration
shows headlamp removed for better illustration.
1. |
Turn signal lamp |
2. |
Low beam |
3. |
Parking lamp/high beam cover |
4. |
Parking lamp |
5. |
High beam |
|
|
|
Install
3. |
Install bulb holder
• |
Connect and lock wiring harness plug
|
• |
Attach cover of dipped and main beam
|
|
4. |
Connect relevant lamp holder by turning it and lock
|
|