vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Rear Fog Lamp/Bulb, Remove and Install (from MY 04) > < Light Switch Centre, Remove and Install

Main Beam / Parking Lamp, Replace (Xenon Headlamp)

  Remove

Warning:   High Voltage! Do not touch components of the xenon low beam when low beam is switched on. Ignition and light switch OFF. The central wiring harness plug for the headlamps must be disconnected.
1.   Remove headlamp
2.   Remove high beam/parking lamp cover flap (1)
3.   Remove main beam bulb
•   Disconnect 2 wiring harness plugs (3)
•   Release and open clamp (2)
•   Remove bulb (5)
4.   Remove parking light bulb
•   Release socket (4) and pull out with bulb
•   Remove bulb from holder
Object Number: 2405621  Size: DEFAULT


  Install

5.   Install parking light bulb
•   Place bulb into holder
•   Insert holder with bulb
6.   Install main beam bulb
Note:   Check bulb code.
•   Insert bulb
•   Fasten clamp
•   Connect 2x wiring harness plug
7.   Refit high beam/parking lamp cover flap
8.   Install headlamps
9.   Adjust headlamp

Rear Fog Lamp/Bulb, Remove and Install (from MY 04) > < Light Switch Centre, Remove and Install