Rear door, remove and install
Remove
1. |
Detach door check link from B-pillar
|
2. |
Separate rear door (3) wiring harness plug
• |
Push in wiring harness plug quick-release fastening
|
• |
Disconnect wiring harness connector.
|
|
3. |
Detach rear door
• |
Unscrew 2x bolt (2) from hinge
|
|
4. |
Remove rear door
Note: 2nd person
required
• |
Remove door up out of hinge
|
|
|
|
Install
5. |
Install rear door
Note: 2nd person
required
• |
Insert door in hinge from above
|
|
7. |
Connect rear door wiring harness plug
• |
Insert wiring harness plug until fast closure engages
|
|
8. |
Attach door check link to B-pillar
• |
Tighten bolt
Note: Use locking
compound when inserting bolt!
|
|
|
9. |
Fit rear door
Position:
|
Dimension in mm:
|
Tolerance:
|
I
|
3.8
|
+/- 1
|
II
|
4.6
|
+/- 1
|
III
|
3.8
|
+/- 1
|
IV
|
3.8
|
+/- 1
|
V
|
4.5
|
+/- 1
|
VI
|
3.8
|
+/- 1
|
|
|
|