Replace side airbag (not deployed) - OPC
Remove
1. |
Disconnect battery
Note: Observe airbag
deactivation capacitor discharge time, 1 min.
|
3. |
Detach adjustment handle (1) on front seat backrest
• |
Unclip adjustment handle panel (2) with suitable tool
|
• |
Unclip front seat backrest adjustment handle
|
|
|
|
4. |
Detach height adjuster panel (1)
• |
Unclip panel with a suitable tool
|
|
5. |
Detach height adjuster (2)
• |
Unscrew bolt (3) and remove lever
|
|
|
|
|
6. |
Detach outside panelling (1)
|
|
7. |
Detach inside panelling
|
|
|
8. |
Detach front seat backrest
• |
Release and unclip Bowden cable (3)
|
|
|
|
9. |
Detach upholstery covering on front seat backrest all round
|
10. |
Detach front seat backrest panelling (2) left
• |
Unscrew 11x bolt (arrows)
|
|
|
|
12. |
Remove side airbag (1)
• |
Unlatch and disconnect wiring harness plug (arrow)
|
|
|
|
Install
13. |
Install side airbag
• |
Connect and latch wiring harness plug
|
|
14. |
Attach front seat backrest panelling left
• |
Tighten 11x bolt
Note: Screws must be
inserted with locking compound.
|
|
15. |
Fasten upholstery covering all round
|
16. |
Attach front seat backrest to front seat
• |
Attach and clip in Bowden cable
|
|
17. |
Attach panelling inside
|
18. |
Attach outside panelling
|
19. |
Install height adjuster
|
20. |
Install height adjuster panel
|
21. |
Attach adjustment handle on front seat backrest
• |
Push on adjustment handle
|
• |
Clip in adjustment handle panel
|
|
|