vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Replace left engine damping block > < Ribbed V-belt

Corsa D

Right Engine Damping Block, Remove and Install

  Remove

1.   Open bonnet
2.   Remove air cleaner housing
3.   Suspend engine from corresponding engine transport shackle on engine crane (1)
Object Number: 10680151 Size: DEFAULT


4.   Remove engine damping block, right hand side
•   Unscrew 2x bolts (1)
•   Unscrew 3x bolts (2)
Object Number: 10678449 Size: DEFAULT


  Install

5.   Install right engine damping block
•   Tighten 3x bolt (M10)
– Tightening torque 60 Nm
•   Tighten 2x bolt M12
– Tightening torque 80 Nm + 45°
– Use new bolts
6.   Unhitch engine from engine crane.
7.   Install air cleaner housing
8.   Close bonnet

Replace left engine damping block > < Ribbed V-belt