Paint Repair - General Instructions

General Information

Preconditions for attaining optimal paint results, besides a thorough knowledge of products and processes, are cleanliness of the equipment, working area and the surface to be painted. Likewise, always ensure that the compressed air used is absolutely free of oil and water particles.

Use of OPEL/VAUXHALL approved materials ensures optimal mutual suitability of paint products.

The painting systems are described extensively in the "PAINT REPAIR SYSTEMS" (KTA - 1620- GB, Edition 11/91) brochure.

They apply for sheet metal and plastic base surfaces.

For these operations and processing of materials, observe the safety regulations and information regarding health and environmental protection guidelines provided by the relevant institutions.

Always process paints, primer and filler in painting booths.

Avoid naked flames and sparks.

An adequate number of fire extinguishers must be on hand.

Use dust masks, active carbon masks or oxygen masks, depending on the type of operation being carried out.

When dry-sanding, use sanding machines with an integrated vacuum unit.

Paint and solvent residues, vacuum unit filter, sanding dust, etc. must be disposed of according to regulations.

All vehicle parts that are not being worked on should be masked during painting operations to prevent damage and dirt.