vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Other Information > < Recommended Torque Values (Steering)

 

 

Special Service Tools

 

KM - 108                 Remover/Installer

 

To remove and install upper steering spindle bearing

 

 

Object Number: 2374377  Size: DEFAULT

 

 

KM-210-A               Steering Wheel Puller

 

To pull off steering wheel

 

 

Object Number: 2382377  Size: DEFAULT

 

 

KM-263-A               Engine Lifter

 

Suspend OHC engine with engine lifter at transport clips using commercially available spring hooks

 

 

Object Number: 2373865  Size: DEFAULT

 

 

KM - 285                 Lock Nut Wrench

 

To loosen and tighten the hex lock nut

 

 

Object Number: 2382413  Size: DEFAULT

 

 

KM-507-C               Ball Joint Remover

 

To press tie rod joint out of steering arm

 

 

Object Number: 2374675  Size: DEFAULT

 

 

KM - 542                 Adjustment Gauge

 

To install steering on bulkhead

 

 

Object Number: 2382414  Size: DEFAULT

 

 

KM - 549                 Installer

 

To install seal ring in steering gear

 

 

Object Number: 2382198  Size: DEFAULT

 

 

KM - 551                 Inspection Gauge

 

To check straight ahead position of steering gear

 

 

Object Number: 2382194  Size: DEFAULT

 

 

KM - J - 4245           Circlip Pliers

 

To remove and install retaining ring in steering gear

 

 

Object Number: 2382455  Size: DEFAULT

 

 

KM - J-22610           Clamping Pliers

 

To tighten bellows retaining strap

 

 

Object Number: 2382454  Size: DEFAULT

 

 

KM - J - 26269         Drift

 

To install needle sleeve in steering gear housing

 

 

Object Number: 2382376  Size: DEFAULT

 

 

Other Information > < Recommended Torque Values (Steering)