|
Motor (Gears, Control Unit), Adjust
 Adjust
|
Ignition on.
|
|
Calibration run
|
|
1
|
Hold preselector switch rotary knob down until motor comes to a
standstill. Cover (glass) cover is in closed position.
|
|
First
|
Learning run
|
|
2
|
Preselector switch rotary knob to lift – roof tilts.
|
|
3
|
Preselector switch rotary knob to closed, hold pressed until
roof closed.
|
|
Second
|
Learning run
|
|
4
|
Preselector switch rotary knob to open – roof opens.
|
|
5
|
Preselector switch rotary knob to closed, hold pressed until
roof closed.
|
Caution
If the roof opens automatically after a closure command (points
3 and 5), repeat points 2 to 5 (1st and 2nd learning runs) by up to
three times.
|
|
|
