BrakesRecommended Torque Values - Brakes
|
Recommended Torque Values – Brakes
Caution
Angle specifications refer to yield
limit controlled fastening bolts, which may only be used once.
Tighten fastening bolts only with the appropriate torque and then
turn further by the specified angle.
|
|
Nm
|
|
Cover plate to steering knuckle (front wheel brake)
|
4
|
|
Brake servo to support (nuts)
|
21
|
|
Front brake caliper to brake carrier
|
30
|
|
Rear brake caliper to semi-trailing arm
|
80
|
|
Brake disc to front or rear wheel hub (lock bolt)
|
4
|
|
Bracket to steering knuckle
|
95 + 30° + 15 1)
|
|
Brake backing plate to rear axle
|
4
|
|
ESP pressure sensor to hydraulic modulator
|
20
|
|
Bleeder screw to brake caliper
|
9
|
|
Yaw rate/acceleration sensor to retaining plate
|
8
|
|
Parking brake lever to vehicle underbody (bolts)
|
20
|
|
Bracket for hydraulic modulator to front frame side member
|
10
|
|
Propshaft centre bearing bracket to vehicle underbody
|
20
|
|
ABS/TC control unit bracket to hydraulic modulator
|
8
|
|
Brake master cylinder to brake servo
|
22
|
|
Rear exhaust pipes to catalytic converter
|
25
|
|
Banjo bolt, brake pressure hose to brake caliper
|
40
|
|
Hydraulic modulator to bracket (nuts)
|
8
|
|
Fork lock nut to brake servo piston rod
|
21
|
|
Centre exhaust pipes to catalytic converter, V6
|
25
|
|
Pedal axle to pedal support
|
18
|
|
Pedal support to bulkhead
|
20
|
|
Wheel to wheel hub
|
110
|
|
Wheel sensor to rear differential
|
8
|
|
Wheel bolts to front/rear wheel hub
|
110
|
|
Parking brake telltale switch to parking brake lever
|
2.5
|
|
ABS/TC control unit to bracket
|
1.5
|
|
Union nut to intake manifold
|
18
|
|
Union nuts for all brake lines
|
16
|
|
Hydraulic modulator heat shield to bracket
|
8
|
1 ) Insert new fastening bolts with locking
compound.
|
|
| Related Literature Units |
|---|
| - | | | - | |
|
08 Brakes
