X 20 SE engine only:
· Oxygen sensor
voltage is in the range 380 mV to 620 mV (circuit interruption,
oxygen sensor defect)
· Condition must be
fulfilled for at least 2.6 s
Condition for approval of fault storage:
The fault is stored and the replacement value called up if
the following conditions are fulfilled consecutively:
1.) Coolant temperature higher than 70 °C /
158 °F
2.) Condition 1.) fulfilled for 3 min
3.) Load signal greater than 2.5 ms
4.) After conditions 1.) to 3.) are fulfilled, waiting
period of 5.1 s elapsed
5.) Trouble codes 73 and 74 not recognized
Replacement values:
· 550 mV
(oxygen sensor control switched off)
|