Brake Band Servo Cover and/or Seal, Replace
Remove
Remove transmission fluid pan (main housing) – see
operation "Transmission Fluid Pan (Main Housing), Remove and
Install and/or Seal, Replace". Unscrew fluid filter (3 bolts).
Inspect
Check fluid screen seal for damage, replace fluid screen if
necessary.
|
|
Unscrew brake band servo cover (4 bolts) and remove with seal
– do not reuse old seal.
Caution
Brake band servo cover still contains transmission fluid.
|
|
Clean
Clean sealing surfaces of brake band servo cover, fluid screen
and transmission fluid pan.
Torque
Install brake band servo cover with new seal, insert 4 screws
and tighten – 25 Nm / 18.5 lbf. ft.
|
|
Attach fluid screen (3 bolts) – 20 Nm / 15 lbf. ft.
Install
Install transmission fluid pan (main housing) – see
operation "Transmission Fluid Pan (Main Housing), Remove and
Install and/or Seal, Replace".
|
|
|