Vauxhall Workshop Service and Repair Manuals

Remedy in

Information Sensor

F0:DATA LIST

Trouble Code Storage when ...

Code

Cause of Fault

No.

82

SELECTOR SWITCH WRONG SIGNAL

10

·   The fault is only recognised when the engine is running

·   The fault is recorded if the engine speed remains

     below 3000 rpm in position "N" or "P" at a load

     greater than 35% after 4 s or the output speed is higher than 8160 rpm in position "R".

Effects:

·   On fault recognition, driving stage "D" is selected