Remove wheel speed sensor - see operation "Wheel Speed Sensor, Remove and Install". Unscrew bolt (1) and remove bracket for wheel speed sensor.
 Install, Connect Attach bracket for wheel speed sensor to steering knuckle. Install wheel speed sensor - see operation "Wheel Speed Sensor, Remove and Install".
 Tighten (Torque) Bracket for wheel speed sensor to steering knuckle - 8 Nm / 6 lbf. ft.
 Inspect Perform operational check. The check can be performed with "TECH 1/TECH 1A" or "TECH 2" in conjunction with the relevant "Opel/Vauxhall MSC, Vectra-B MY '96" program module - see relevant Checking Procedures. | 
Remove, Disconnect 