Ensure that contact surfaces of rear wheel hub and brake disc are plane and free from burrs. Attach brake disc with detent screw (1) to rear wheel hub. Install brake calliper - see operation "Brake Calliper for Rear Wheel Brake, Remove and Install". Attach rear wheel.
Tighten (Torque) Brake disc with detent screw (1) to rear wheel hub - 4 Nm / 3 lbf. ft. Wheel to wheel hub - 110 Nm / 81 lbf. ft.
Adjust Adjust parking brake - see operation "Parking Brake, Adjust (Vehicles with Disc Brake)". |