Drive Disc, Remove and Install
Remove, Disconnect
Remove automatic transmission - see operation "Transmission, Remove and Install" in group "K".
Counterhold drive disc with KM-652 (1) and remove from crankshaft.
Important!
Re-cut threads in crankshaft before installing drive disc.
Install, Connect
Attach drive disc to crankshaft with new fastening bolts - tightening torque 60 Nm / 44 lbf. ft. Lock drive disc when tightening with KM-652 (2).
Install automatic transmission - see operation "Transmission, Remove and Install" in group "K".
Remove, Disconnect 
Important! 
Install, Connect 