Detach ignition cable cover (1) from cylinder head cover. Disconnect wiring harness plug (2) from camshaft sensor. Remove front toothed belt cover - see operation "Front Toothed Belt Cover, Remove and Install". Remove fastening bolt (3) from camshaft sensor. Remove camshaft sensor (4) upwards.
Install, Connect Insert camshaft sensor from above and attach using the fastening bolt - tightening torque 6 Nm / 4 lbf. ft. Install front toothed belt cover - see operation "Front Toothed Belt Cover, Remove and Install". Connect wiring harness plug to camshaft sensor. Attach ignition cable cover to cylinder head cover - tightening torque 3 Nm / 2.2 lbf. ft. |