vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Valve Stem Seals, Replace (Cylinder Head Installed) > < Camshaft Sensor, Remove and Install (X 18 XE1)

Vectra B

 

Hydraulic Valve Lifter, Remove and Install  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Remove camshafts - see operation "Camshafts, Remove and Install".  

Remove hydraulic valve lifters from cylinder head with KM-845.  

Lay hydraulic valve lifters aside in correct order, to ensure that they can be allocated to the valves on reinstallation.  

Object Number: 616195 Size: DEFAULT  Clean   

Clean all removed parts.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Lightly coat hydraulic valve lifters with engine oil and insert in correct sequence in cylinder head.  

Install camshafts - see operation "Camshafts, Remove and Install".  

Object Number: 2392806 Size: DEFAULT

 

 
Related Literature Units
-

Valve Stem Seals, Replace (Cylinder Head Installed) > < Camshaft Sensor, Remove and Install (X 18 XE1)