Detach wiring harness plug (2) from ignition module (3). Detach ignition module from cylinder head cover or cylinder head and detach from spark plugs using KM-6009 (1). Remove spark plugs with KM-194-E. For X 16 XEL and X 18 XE1: Remove fuel pump relay - see operation "Fuel Pump Relay, Remove and Install (X 16 XEL)" or "Fuel Pump Relay, Remove and Install (X 18 XE1)". Notice: To open the throttle valve for Y 16 XE, Z 16 XE, Z 18 XE and Z 18 XEL, this must be activated using TECH2 - see corresponding Checking Procedure. |