Remove oil pump - see operation "Oil Pump, Remove and Install" or "Oil Pump, Remove and Install (new version)". Remove closure plug (1) for safety valve from oil pump. Remove spring and piston from oil pump with rod magnet - ensure correct installation position.
 Install, Connect Install piston (5) (note installation position), spring (4), seal ring (3) and screw plug (2) in oil pump - tightening torque 30 Nm / 22 lbf. ft. Install oil pump - see operation "Oil Pump, Remove and Install" or "Oil Pump, Remove and Install (new version)". | 
Remove, Disconnect 