Oil Circuit (X 18 XE, X 20 XEV, C 20 SEL, C 22 SEL)
Engine |
|
X 18 XE, X 20 XEV single-part aluminium oil pan |
X 18 XE, X 20 XEV two-part aluminium/sheet metal oil pan |
Engine oil filling quantities |
|
|
|
|
Filling quantity with oil filter change |
l |
4.25 |
5.00 |
|
Filling quantity without oil filter change |
l |
4.00 |
4.75 |
|
Mark MIN to MAX |
l |
1.00 |
1.00 |
Engine oil quality |
|
ACEA A3-98 |
Engine oil viscosity |
|
SAE 0W-X 1) , 5W-X 1) , 10W-X 1) |
Engine oil disposal |
|
When disposing of used oil, observe the relevant local regulations. |
Oil pump |
|
|
|
|
Oil pressure 2) |
kPa (bar) |
200 (2.0) |
200 (2.0) |
|
Tooth backlash |
mm |
0.1 up to 0.2 |
0.1 up to 0.2 |
|
Gear offset |
mm |
0.03 to 0.10 |
0.03 to 0.10 |
Engine oil consumption |
1 / 1000 km |
0.6 |
0.6 |
1) "X must be 30 or greater than 30. 2) At idle speed and engine at operating temperature (oil temperature ≥ 80 ° C/176 ° F)
Oil Circuit (Continued)
Engine |
|
C 20 SEL |
C 22 SEL |
Engine oil filling quantities |
|
|
|
|
Filling quantity with oil filter change |
l |
4.50 |
4.50 |
|
Filling quantity without oil filter change |
l |
4.25 |
4.25 |
|
Mark MIN to MAX |
l |
1.00 |
1.00 |
Engine oil disposal |
|
When disposing of used oil, observe the relevant local regulations. |
Oil pump |
|
|
|
Oil pressure 1) |
kPa (bar) |
250 (2.5) |
400 (4.0) |
|
Tooth backlash |
mm |
0.1 up to 0.2 |
0.1 up to 0.2 |
|
Gear offset |
mm |
0.03 to 0.10 |
0.03 to 0.10 |
1) At idle speed and engine at operating temperature (oil temperature ≥ 80 ° C/176 ° F)
|