vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Thermostat, Remove and Install > < Valve Stem Seals, Replace (Cylinder Head Installed)

Vectra B

 

Seal Ring - Front Crankshaft, Replace  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Remove toothed belt - see operation "Toothed Belt, Remove and Install".  

Remove toothed belt drive gear - counterhold with KM-662-C (1). Edge out crankshaft seal ring with suitable tool - ensure that sealing surfaces are not damaged.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Lightly coat sealing lip of seal ring with silicone grease (white). Press seal ring into oil pump with KM-693-A (2) - use fastening bolt and washer of toothed belt drive gear.  

Attach toothed belt drive gear to crankshaft with new fastening bolt - tightening torque 130 Nm / 96 lbf. ft. + 40 ° to 50 ° - counterhold using KM-662-C (1).  

Install toothed belt - see operation "Toothed Belt, Remove and Install".  

Object Number: 2392792 Size: DEFAULT

 

 
Related Literature Units
-

Thermostat, Remove and Install > < Valve Stem Seals, Replace (Cylinder Head Installed)