Field Remedy: 1034
Subject: |
Engine - Stalling, difficult to restart
engine TC P0100 is set |
Models: |
Engines: |
Option: |
Vectra-B 1996... |
X18XE| X20XEV |
|
Complaint: |
Engine stalling, motor is difficult to
restart, engine runs rough whilst driving or engine telltale comes
on or TC P0100 is set. |
Cause: |
Fretting corrosion on the hotfilm airmass
meter sensor plug connec- tion due to movement of motor. |
Production: |
|
Remedy:
In case of complaint fit a new airmass meter sensor plug and
socket.
Instruction:
Replace airmass sensor.
Remove old plug and install new ensuring the 4 cables are correctly
located and secured (new plugs should be ordered by TIC).
Secure the new plug to the airmass sensor with two crossed over
cable ties to ensure relative movement of the connection and
sensor is minimised.
Be careful to ensure that the hood insulation does not press
on to the cable connection
FunctionalGroup: |
J - Engine |
Complaint Group: |
19 - Poor Engine Driveability |
Trouble Code: |
P0100 |
|