Block Diagram - Vectra-B
15 |
Ignition ON (terminal 15) |
30 |
Battery positive (terminal 30) |
31 |
Ground (terminal 31) |
H16 |
Telltale, preheating period |
H30 |
Telltale, engine |
K50 |
ABS control unit |
K53 |
Relay, radiator fan |
K60 |
Relay, AC compressor speed |
K70 |
EDC 15 M control unit |
K76 |
Relay, preheating period |
K80 |
Relay, filter heating |
K85 |
AT control unit |
K114 |
Relay, engine (main relay) |
K117 |
Immobiliser control unit |
K128 |
Injection pump control unit |
P7 |
Tachometer |
P24 |
Engine oil temperature sensor |
P30 |
Coolant temperature sensor |
P35 |
Crankshaft pulse pick-up |
P44 |
Hot film mass air flow meter |
P65 |
Charge pressure sensor |
P67 |
Pedal position sensor |
|
|
5.8.4 Block Diagram - Vectra-B (continued)
S20 |
Compressor switch, high and low pressure |
S43 |
Cruise control switch |
S45 |
Cruise control clutch switch |
S101 |
Compressor switch |
S116 |
Brake lamp switch |
U12 |
Fuel filter heating |
U15 |
TID |
U16 |
MID |
X13 |
Diagnostic plug 16 P |
Y18 |
Solenoid valve, exhaust gas recirculation (electropneumatic pressure transducer) |
Y28 |
Solenoid valve, swirl valves (electropneumatic pressure transducer) |
Y29 |
Solenoid valve, charge pressure control (electropneumatic pressure transducer) |
|
|
|