Field Remedy: 1874
Subject: |
Engine X14XE, X16XE, X16XEL - Cylinder
head cover assembly problem |
Models: |
Engines: |
Option: |
Corsa-B 1995...2000,Tigra
1995...2000,Astra-F 1995...2000,Astra-G 1998...2000,Zafira
1999...2000,Vectra-B 1996...2000 |
X14XE| X16XE,X14XE| X16XE,X14XE|
X16XEL,X14XE| X16XEL,X16XEL,X16XEL |
|
Complaint: |
Possible damage of sealing / cylinder
headcover. |
Cause: |
Problems may occur during installation of
the cylinder head cover, due to possible production tolerances.
Danger to damage the cylinder head cover sealing on the edges of
the camshaft bearing caps. |
Production: |
|
Remedy:
To avoid a damage of the sealing cylinder head cover, rework camshaft
bearing caps with a file, in case of assembly problems.
1. Remove cylinder head cover
- see working procedure "cylinder head cover removal and installation",
group "J", of the corresponding Service Instruction.
2. Cover cylinder head, camshafts and valve assembly with a cloth.
3. Carefully file off the edges of the camshaft bearing caps
(see Pic. I, arrows)in the affected area, by using a small file.
Note:
Avoid damage of sealing surfaces and take care not to soil the engine.
4. Afterwards remove all chips completely and remove the cloth.
5. Install cylinder head cover
- see working procedure "Cylinder head cover removal and
installation", group "J", of the corresponding
Service Instruction.
FunctionalGroup: |
J - Engine |
Complaint Group: |
08 - Hard to operate |
Trouble Code: |
None |
|