Operations on Transmission Shift Linkage (except F 23)
Gearshift Lever, Remove and Install
Remove, Disconnect
Remove gearshift lever cover - see operation "Gearshift Lever Cover, Remove and Install". Press off clamp (1) from gearshift lever and remove pin (2). Lever damping ring from groove of the gearshift lever.
Install, Connect
Insert new damping ring in groove of the gearshift lever. Coat gearshift lever bearing with special grease. Place gearshift lever in guide. Introduce pin and press clamp on gearshift lever. Install gearshift lever cover - see operation "Gearshift Lever Cover, Remove and Install".
Remove, Disconnect 
Install, Connect 