Rocker Arm for Gear Set Brake, Replace (for F 18/F 18+ only)
Remove, Disconnect Remove shift cover - see operation "Shift Cover, Disassemble and Reassemble (F 13/F 15/F 17/F 18/F 18+)". Release retaining pin using small screwdriver and remove in direction of arrow.
Important! Do not allow retaining split pin to fall into transmission housing. Remove rocker arm for gear set brake (1).
Install, Connect Insert rocker arm for gear set brake (1) and secure with retaining split pin in direction of arrow. Shift cover - see operation "Shift Cover, Disassemble and Reassemble (F 13/F 15/F 17/F 18/F 18+)". |