Detach wiring harness plug for single box filter temperature switch (1) and wiring harness plug for fuel filter heating (2). Detach fuel lines (4) from single box filter. Remove bleeder screw (5). Collect emerging fuel. Remove fastening bolts for single box filter (3) and protective plate and remove single box filter.
Install, Connect Install single stage box filter together with guard. Attach fuel lines with new seal rings and bleeder screw with new seal ring to single box filter. Attach wiring harness plug for single box filter temperature switch and wiring harness plug for fuel filter heating.
Tighten (Torque) Fastening bolts (3) - 25 Nm / 18 lbf. ft. |