vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Fuel Filter Element, Drain Water (X 17 DT, X 20 DTL, X 20 DTH, Y 20 DTH, Y 22 DTR) > < Fuel Filter Element, Drain Water (X 17 DT, X 20 DTL, X 20 DTH, Y 20 DTH, Y 22 DTR)

Vectra B

 

Fuel Gauge, Remove and Install  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Empty fuel tank with fuel transfer unit, see "Opel/Vauxhall Workshop Equipment" catalogue. Store drained fuel in suitable locking container.  

Fold rear seat down and lever assembly opening.  

Disconnect wiring harness plug (2) from maintenance opening lock lid.  

Mark fuel lines (1) and disconnect with KM-796. Close off fuel lines with Closure Plug KM-807.  

Object Number: 2393276 Size: DEFAULT

 

 

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Release locking ring for maintenance opening lock lid with KM-797 (1). Carefully pull maintenance opening lock lid upwards - at the same time, pay attention to cable and hose connections.  

Remove wiring harness plug for fuel pump (for petrol engine) (4) and wiring harness plug for fuel tank sensor (5) from maintenance opening lock lid.  

Mark fuel hoses (2) and remove from maintenance opening lock lid, remove gasket (3) and lay maintenance opening lock lid aside.  

Object Number: 2401966 Size: DEFAULT

 

 

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Press catch (1) outward and pull fuel gauge upward from reservoir - press reservoir to the side.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Insert fuel gauge in reservoir - catch must engage audibly.  

Connect fuel hoses to maintenance opening lock lid - note identification.  

Connect fuel gauge wiring harness plug and fuel pump (petrol engine) wiring harness plug to maintenance opening lock lid.  

Carefully insert maintenance opening lock lid with new gasket.  

Turn lock ring for maintenance opening lock lid clockwise with KM-797 and lock - lock ring must audibly engage.  

Object Number: 2387309 Size: DEFAULT

 

 

Object Number: 616192 Size: DEFAULT  Install, Connect   

Disconnect Closure Plug KM-807 from fuel lines and slide fuel lines on connections until quick fittings engage - note identification.  

Connect wiring harness plug to maintenance opening lock lid.  

Close off assembly opening and fold down lower rear seat.  

Top up fuel tank with fuel transfer unit, see "Opel/Vauxhall Workshop Equipment" catalogue.  

 

 

Fuel Filter Element, Drain Water (X 17 DT, X 20 DTL, X 20 DTH, Y 20 DTH, Y 22 DTR) > < Fuel Filter Element, Drain Water (X 17 DT, X 20 DTL, X 20 DTH, Y 20 DTH, Y 22 DTR)