Servo Motor - Outside Rear View Mirror, Remove and Install Notice: Non-standard operations on vehicles first registered before May 1996 are described in Technical Information Bulletin TI-C-22, R-80, 12/1995.
 Remove, Disconnect Remove outside rear view mirror - see operation "Outside Rear View Mirror, Remove and Install". Remove mirror face - see operation "Mirror Face, Remove and Install". Remove rear view mirror servo motor (3 screws) (1). Release and disconnect wiring harness plug (2).
 Install, Connect
|
Connect wiring harness plug to rear view mirror servo motor. |
|
Attach servo motor to rear view mirror. |
|
Install mirror face - see operation "Mirror Face, Remove and Install". |
|
Install rear view mirror - see operation "Outside Rear View Mirror, Remove and Install". |
| 
|
|
