Beetle L4-1.9L DSL Turbo (ALH) (1998)
If something else is displayed:
See Scan Tool (ST) operating instructions.
-
Press buttons -0- and -6- to select "End Output" function 06.
Indicated on display
Rapid data transfer
Q
06 - End Output
-
Press -Q- button to confirm input.
Indicated on display
Rapid data transfer
HELP
Insert address word XX
-
Switch ignition off.
-
Disconnect scan tool from Data Link Connector (DLC).
Without Manufacturer Scan Tool
The manufacturer does not provide a procedure for reading diagnostic trouble codes without a scan tool.
With Manufacturer Scan Tool
Erase DTC Memory (Function 05)
NOTE: The VAG 1552 Mobile Scan Tool (ST) can be used instead of the VAG 1551 Scan Tool (ST), however a print-out is not possible.
-
Connect VAG 1551 scan tool. Refer to "Selectable Functions When Using VAG 1551", under "Restraint Systems", See: Scan Tool Testing and
Procedures/Scan Tool Connecting and Initial Checks
-
Initiate On Board Diagnostic (OBD). See: Initial Inspection and Diagnostic Overview/On Board Diagnostic (OBD), Initiating Program
Requirements
-
Functional check completed
-
All malfunctions repaired
-
DTC memory checked again
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -5- to select "Erase DTC Memory" function 05.
Indicated on display
Rapid data transfer
Q
05 - Erase DTC Memory
-
Press -Q- button to confirm input.
Indicated on display
Rapid data transfer
->
DTC Memory is erased!
-
Press -> button.
Indicated on display
Rapid data transfer
HELP
Select function XX