Beetle L4-1.9L DSL Turbo (ALH) (1998)
Procedures/Scan Tool Connecting and Initial Checks
-
Initiate On Board Diagnostic (OBD). See: Initial Inspection and Diagnostic Overview/On Board Diagnostic (OBD), Initiating Program
Requirements
-
Functional check completed
-
All malfunctions repaired
-
DTC memory checked again
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -5- to select "Erase DTC Memory" function 05.
Indicated on display
Rapid data transfer
Q
05 - Erase DTC Memory
-
Press -Q- button to confirm input.
Indicated on display
Rapid data transfer
->
DTC Memory is erased!
-
Press -> button.
Indicated on display
Rapid data transfer
HELP
Select function XX
NOTE:
-
This message indicates an error in the test sequence.
Attention!
->
DTC Memory was not interrogated
-
Adhere exactly to the test sequence: first check DTC memory, and if necessary, repair malfunctions, then erase DTC memory.
Indicated on display
Rapid data transfer
HELP
Select function XX
Without Manufacturer Scan Tool
The manufacturer does not provide a procedure for clearing diagnostic trouble codes without a scan tool.
Diagnostic Trouble Code Descriptions
For information regarding B, C, P, U and Manufacturer Code Descriptions - See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Descriptions
Diagnostic Trouble Code Tests and Associated Procedures
For information regarding diagnosis of all B, C, P, U and Manufacturer Codes - See: Powertrain Management/Computers and Control Systems/Testing
and Inspection/Diagnostic Trouble Code Tests and Associated Procedures
Scan Tool Connecting and Initial Checks
Special Tools And Equipment