Beetle L4-1.9L DSL Turbo (ALH) (1998)
Rapid data transfer
HELP
Select function XX
If a DTC is recognized:
-
Repair malfunction.
-
Erase DTC Memory (function 05).
-
Check DTC memory again (function 02).
Malfunctions printed out can be repaired with the aid of the DTC table. See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/VAG Code Charts/Comfort System (With Power Windows)
"Read Measuring Value Block" function 08 and display group overview are additional aids.
See: Scan Tool Testing and Procedures/Measuring Value Blocks (Function 08)/Reading
See: Scan Tool Testing and Procedures/Measuring Value Blocks (Function 08)/Evaluating Measured Value Blocks
The measuring value block is divided into 15 display group numbers: The assignment of the individual display fields can be found in the display group
overview.
Indicated on display
No DTC recognized
->
If "No DTC recognized " is indicated on display, press -> button to return to "Select function XX" prompt.
"Read Measuring Value Block" function 08 and display group overview are additional aids.
See: Scan Tool Testing and Procedures/Measuring Value Blocks (Function 08)/Reading
See: Scan Tool Testing and Procedures/Measuring Value Blocks (Function 08)/Evaluating Measured Value Blocks
Indicated on display
Rapid data transfer
HELP
Select function XX
If something else is displayed:
See Scan Tool (ST) operating instructions.
-
Press buttons -0- and -6- to select "End Output" function 06.
Indicated on display
Rapid data transfer
Q
06 - End Output
-
Press -Q- button to confirm input.
Indicated on display
Rapid data transfer
HELP
Insert address word XX
-
Switch ignition off.
-
Disconnect scan tool from Data Link Connector (DLC).
Without Manufacturer Scan Tool
The manufacturer does not provide a procedure for reading diagnostic trouble codes without a scan tool.
With Manufacturer Scan Tool
Erase DTC Memory (Function 05)
NOTE: The VAG 1552 Mobile Scan Tool (ST) can be used instead of the VAG 1551 Scan Tool (ST), however a print-out is not possible.
-
Connect VAG 1551 scan tool. Refer to "Selectable Functions When Using VAG 1551", under "Restraint Systems", See: Scan Tool Testing and