Beetle L4-1.9L DSL Turbo (ALH) (1998)
End Output (Function 06)
End Output (Function 06)
-
Press buttons -0- and -6- to select "End Output".
Indicated on display:
Rapid data transfer
Q
06 - End output
-
Press -Q- button to confirm input.
Indicated on display
Rapid data transfer
HELP
Enter address word XX
-
Switch ignition off.
-
Disconnect scan tool from Data Link Connector (DLC).
Programming and Relearning
Code Control Module (Function 07)
NOTE:
-
The control module is supplied pre-coded according to the vehicle equipment.
-
The coding is performed with the VAG 1551 Scan Tool (ST).
-
Connect VAG 1551 scan tool. Refer to "Selectable Functions When Using VAG 1551", under "Restraint Systems", See: Scan Tool Testing and
Procedures/Scan Tool Connecting and Initial Checks