Beetle L4-1.9L DSL Turbo (ALH) (1998)
/Page-1723001.png)
Trunk / Liftgate Shock / Support: Procedures
-
Clamp gas-filled strut in vice in area x = 50 mm.
WARNING: Clamp only within this area, otherwise danger of accident!
-
Saw through cylinder at gas-filled strut within first third at cylinder's overall length using piston rod end of cylinder as reference point.
NOTES:
-
Protective goggles must he worn when sawing.
-
Cover area of saw cut with a cloth.
-
Dispose of oil properly
