Beetle L4-1.9L DSL Turbo (ALH) (1998)
Trunk / Liftgate Shock / Support: Removal and Replacement
Gas-filled Strut, Removing
-
Support rear lid.
-
Lift securing clip - 2 - using a screwdriver and remove gas-filled strut from ball stud - 1 -
NOTE: When re-using gas-filled strut, securing clip - 2 - must not be removed completely out of ball socket, otherwise the securing clip may be
damaged.
1. Combi ball stud, 21 Nm
2. Securing clip
3. Gas-filled strut