Beetle L4-1.9L DSL Turbo (ALH) (1998)
Trunk / Liftgate Lock: Service and Repair
Lock Cylinder Carrier, Removing and Installing (Power)
Removing
-
Remove trunk lid trim refer to "Lock Carrier Trim, Removing and Installing". See: Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair
-
Separate connectors -arrows-.
-
Unclip operating rod -2- for lock carrier.
-
Release wire from clip -2-
-
Remove screws -1- and remove electrical wire support panel -2-.
-
Remove bolts -1- and loosen tie wrap -3- of water drain channel -4-.
-
Pull lock cylinder carrier -1- off trunk lid and then from outer hand grip.
Installing
-
Reassemble in reverse sequence.