Beetle L4-1.9L DSL Turbo (ALH) (1998)
-
Carefully pry off clutch plate using two large screwdrivers -A-.
Use locally available 2 or 3 arm puller if plate is securely seated (difficult to remove).
Clutch pulley, removing
-
Remove circlip, refer key -4- See: A/C Clutch - N25-, Servicing (Sanden)
-
Attach commercially available 2 arm puller -A- on shoulder -B- and pull off pulley.
Clutch coil, installing
-
Install coil on compressor.
-
Locate locking pin on coil -A- into recess -C-.